ŠKODA factories are running at full capacity; production of the new Fabia will begin at the end of August

Newsheadline

Add to File Folder

• ŠKODA restarts its production after the factory holiday
• Production plant in Mladá Boleslav has been upgraded for the new ŠKODA Fabia
• Maintenance and refurbishment in all Czech factories
• The new engine centre in Česana will open shortly

After just a two-week factory holiday, production at all three Czech ŠKODA sites is in full swing. In addition to refurbishment, the manufacturer used the factory shut-down, in particular in Mladá Boleslav, to prepare for the new ŠKODA Fabia (1) production to start. The new small car will start to roll off the production line at ŠKODA’s main plant from the end of August.

The new ŠKODA Fabia - a young, crisp, urban small car with typical ŠKODA genes and lots of character.In just a few weeks the car manufacturer will be pushing forward with the biggest model campaign in the company’s history with the new ŠKODA Fabia. “The new Fabia really does represent: small car, big on technology,” says Head of Production of Vehicles Marek Jancák. “More importantly we have expanded and technically updated important areas of the M1 assembly line in Mladá Boleslav,” says Jancák. This means that the Fabia factory has a new, extremely modern facility to configure new assistance systems. The paint shop has also, in some areas, been updated. During the factory holiday a total of 40 industrial engineering companies were at work in the company.

New ŠKODA Fabia features all-new engine lineup: Diesel engines available for the new ŠKODA Fabia comprise three performance levels of the new turbocharged direct-injection 1.4 litre (photo) common-rail design with three cylinders. Its engine block is made of aluminium alloy.One of the focal points was to integrate the new Fabia engines into the production process. The small car features a completely new range of engines and is the most environmentally friendly and economical Fabia of all time. Energy consumption has been reduced by up to 17 per cent compared to its predecessor. The new Fabia engines (four petrol, three diesel) meet EU6 standards and are fitted with Start-Stop System and brake energy recovery as standard.

The second assembly line in the ŠKODA parent plant has also been comprehensively updated. ŠKODA manufacture the Octavia and Rapid models on assembly line M13. In addition, the M13 production shop underwent an expansion of production capacity for driver assistance systems.

In addition, a lot of work has been carried out to the Kvasiny and Vrchlabí ŠKODA factories. Kvasiny is currently setting up a new body shop. Its completing and the related infrastructure measures are among the highest priorities of ŠKODA. During the factory holiday, the Vrchlabí plant used the time to carry out maintenance to the DQ 200 transmission production line.

ŠKODA put a total of 100 individual projects into effect across all 3 Czech factories (Mladá Boleslav, Kvasiny und Vrchlabí) during this break. About 90 companies have been involved in the process.

At an exceptional rate, the final work on the new ŠKODA engine test centre in Česana near Mladá Boleslav is nearing completion. It has been in pre-production phase since June and will be fully-operational from the beginning of September 2014. The manufacturer, jointly with Volkswagen, is investing over 34 million euros in the extension of its current technology and development centre. This is the largest development investment of a private company within the Czech Republic.

 

1) The new ŠKODA Fabia: The vehicle has not yet gone on sale. It does not yet have type approval and therefore Directive 1999/94/EC does not apply.